WHEN chemical manufacturer and supplier Nutrochem commenced development of its new distribution centre and bulk handling facility in Bethal, Mpumalanga, the company selected Technicrete’s Enviro-Wall retaining wall system.
Enviro-Wall is a versatile reversible block with one side smooth and the other fluted, allowing for a variety of pleasing visual effects. It can be installed with gaps between blocks for vegetation growth or as a solid engineering structure.
Pieter du Plessis, chief executive officer of Nutrochem, said, “We have had a long-standing relationship with Technicrete for over 25 years; in fact, we had Enviro-Wall installed in our existing plant and never encountered problems with the product. Therefore, it made sense to engage with Technicrete again for our new facility.”
“The Enviro-Wall system, in our opinion, is of a very good quality and easy to work with. At our new site, it is used mainly as a retaining wall along our site boundaries where we have level differences. A big plus was the technical support provided by Technicrete on our initial project, which gave our team the experience needed to easily install the bricks on our expansion project.”
Constructed from dry-stacked interlocking precast blocks, the simplicity of the Enviro-Wall design enables blocks to be easily and quickly placed to form an effective retaining wall. Opening or closing the spacing between blocks allows the Enviro-Wall structure configuration to be altered, so that the cavities between adjacent blocks can be filled with soil, enabling plant growth. It can also be installed as a solid, closed-face structure.
Subject to the engineer’s design of the overall wall structure incorporating the blocks, the system can accommodate a wide range of retaining wall or embankment heights. Lower walls would typically be designed as Gravity walls, where the blocks themselves resist soil forces, whilst higher walls are generally reinforced with structural geogrid layers that are locked in place and tensioned between the Enviro-Wall blocks, creating a reinforced soil mass behind the Enviro-Wall blocks, constituting a reinforced wall design.
The angle of inclination of the wall may be set by using the (optionally supplied) base block at 70° but Technicrete’s engineering team can assist if other angles might be preferred or required.
The wall accommodates both concave and convex alignments, down to a small (2m) radius of curvature. Enviro-Wall structures accommodate moderate ground settlement while foundation requirements will vary according to wall height and underlying soil conditions. It is suitable for high and low walls, (near) vertical (<88°) angles, riverbank protection and numerous other commercial, industrial and domestic applications.
“We were delighted to work with Nutrochem again on their new Bethal project. Technicrete supplied more than 15,000 Enviro-Wall blocks for their retaining wall requirements. Over the years, we have worked together, supplying Technicrete products for their various developments. The longevity of our relationship with Nutrochem speaks volumes about how Technicrete believes in building personal relationships with customers in addition to ensuring their satisfaction with our technical support, product quality and delivery,” said Syfran Chuene, sales consultant, Technicrete, Mpumalanga.
“Technicrete has always delivered a high-quality product and delivered technical support where needed. I cannot fault the service we have received over the years from Technicrete.” concluded Du Plessis.
It should be noted that the block itself is only one component of the complete wall structure.
