Wed, 20 Oct 2021
22.7 C

How admixtures are helping contractors save water

Home Infrastructure Construction & Civils How admixtures are helping contractors save water

RESPONSIBLE contractors have realised the growing strain on South Africa’s scarce water resources, and Chryso is supporting their conservation efforts with its water-reducing admixtures for concrete.

That’s according to according to Patrick Flannigan, Technical Manager: Concrete Business Unit at Chryso Southern Africa, who cited the construction of the Vlakfontein Reservoir near Standerton in Mpumalanga as a recent example.

With an inner diameter of 154 metres and a heavily reinforced 11,8-metre-high wall, it is believed to be one of the largest cylindrical post-tensioned concrete reservoirs in the world. Flannigan said the project made use of several Chryso admixtures to reduce water and improve workability.

“One of these is Chryso Plast Omega 178 plasticiser which, when used in a concrete mix, permits a reduction in water content without affecting the consistency, also referred to as the workability. It can also increase the slump – or flow – without affecting the water content of the mix.”

The Vlakfontein Reservoir has a ground water drainage system constructed with three layers of 5MPa no-fines concrete. The 8,000m3 of no-fines concrete comprises a 50mm thick layer of 9,5mm stone mix, followed by a 245mm and 125mm layer of 19mm aggregate.

Chryso Easydrain was introduced to these mixes to facilitate consistency and ensure the aggregate would bind mechanically and hydraulically to the cement paste. This specialised admixture fluidises the concrete, assists with a homogenous mix and improves curing to reduce the chance of cracking.

The bonded aggregates, once dried, will not loosen, Flannigan said. An additional drainage layer of around 2 200m3 of no-fines concrete will be poured around the reservoir.

Once the no-fines concrete was completed, a layer of 200mm 35 MPa concrete was pumped in 13 pours of approximately 250m3 each. This mix included Chryso Serenis, a shrinkage reducing admixture. This, together with Chryso Omega 178 superplasticiser, reduces water and assists with workability.

Chryso CWA 10 crystalline waterproofing agent will provide integral waterproofing and reduce permeability in the concrete. The crystals prevent water penetration and protect the concrete against corrosive ground water and chemicals.


Chryso’s water-reducing admixtures were also used in the Khutsong Reservoir near Carletonville in Gauteng. Due to the danger of sinkholes in this region, and the possibility of ground movement, the reservoir is the first to be constructed with a pre-tensioned concrete floor.

The scale of the work required 212 truckloads of concrete for the floor, successfully poured within a day. The 1,267m3 concrete floor used pumped mixes at 35MPa at a thickness of 450mm. In this demanding contract, the concrete mix included Chryso ZA 1559, a new generation, multi-dose water-reducing plasticiser.

“This admixture allows a wide range of dosages to be applied, without any excessive retardation at the higher dosages,” Flanigan said. “The multi-dose characteristic of CHRYSO ZA 1559 also gives concrete extended workability characteristics.”

This, he added, improves the cohesion and lowers the viscosity of a concrete mix. This results in an improved homogeneity and compaction, allowing for superior off-shutter finishes. With less need to add extra water, Chryso ZA 1559 reduces the permeability of concrete, thereby improving is durability.

“The product may be used in mixes extended with limestone or commonly used supplementary cementing materials (SCMs) like ground granulated blast furnace slag (GGBS), fly ash and silica fume. At the same time, it does not undermine the early age strength of concrete. In fact, in certain cases, it may be used to improve it.”

Chryso 1559 has applications in readymix concrete and mechanically mixed site concrete, as well as conventionally placed, pumped and highly reinforced concrete. It conforms to the requirements of SANS 50934-2 (EN 934-2) standards, which are approximate equivalents of ASTM C494 Type A.

Water evaporation was successfully controlled with Chryso Profilm 19 evaporation reducer, while shrinkage of the reservoir floor was reduced using Chryso Serenis shrinkage reducing agent. A minimum of 180 litres of water per m3 had to be used and fly ash was added as the heat of hydration had to be controlled due to the mass pour. The end strength did not exceed 45MPa.

Most Popular

Reaching for Africa’s true potential: Five principles for realistic technology adoption in Africa

By Canninah Mapena, Rockwell Automation AFRICA is undoubtedly a land of abundance and potential. From our mineral resources to our rich agriculture to our youthful...

Wanted: ‘experienced’ developer for Ngqura manganese terminal project

THE port of Ngqura is a step closer to getting a new manganese terminal. This is after the Coega Development Corporation (CDC) announced on...

Bus line doubles down on telematics tech

CONNECTED fleet management provider MiX Telematics has renewed its contract with Intercape for an additional five years. Intercape, a customer of MiX Telematics since 2015,...

Africa is SEW ripe for investment

THE South African Department of Trade and Industry recently met with drive and control technologies specialist SEW-EURODRIVE to discuss its R200-million investment into the...