Skip links

Non-contact level measurement performs well in hygienic and industrial applications

The radar level sensor LW2720 from ifm sets new benchmarks for speed and accuracy. Starting with installation in record time: a standard M12 cable, fast parameter setting using IO-Link, and a large selection of adapters enable a simple and customised out-of-the-box start-up.

For example, when used in tanks that can be as high as 10 metres, the LW2720 sensor provides precise level detection even in the presence of agitators or spray balls. It also remains unaffected by changing media properties. Even the high-speed filling or emptying of tanks is registered by the radar sensor thanks to the 80 GHz technology – fast, with high precision and without blind zones.

The hygienic radar level sensor can be used in the production of wine and fruit brandies. Steinhauser distillery in Kressbronn on Lake Constance, has been in existence since 1828 and is still family-owned today. 1996 saw the erection of what was then the most modern bonded distillery in Europe. ifm sensors and software have been supporting production since 2021. One sensor used in the production of spirits and wine is the LW2720 non-contact radar sensor. It monitors the level in the tank which is filled with various fruit mashes. The mash is then fermented in the tank.

The reasons for using the radar sensor are numerous: unlike hydrostatic level measurement by means of a flush pressure sensor, the non-contact measurement rules out deposits on the measuring cell. This is important because deposits can have a negative effect on the measurement. The same goes for the so-called head pressure created in the tank during fermentation which would also affect the pressure measurement. What is more, the sensor’s intelligent algorithm can reliably mask the agitator that is moved into the tank during the filling process.

The distillery says, “Using the LW2720 radar sensor and IO-Link, we can now monitor and display the level digitally via moneo. The advantage for us is that we no longer have to measure manually at a height of 10 metres but can also monitor the process remotely.”

Levels can also be monitored in hygienic stainless steel tanks. The foundations of Meckatzer Löwenbräu Allgäuer Bierspezialitätenwere laid over 280 years ago when Joseff Fessler served Meckatzer beer from the Allgäu region for the first time in 1738. 115 years later, Lena and Gebhard Weiss acquired the ‘Landbrauerei zu Meckatz’, thus establishing the Weiss family’s enduring passion for brewing high-quality Allgäuer beer.

Today, sensor technology from ifm supports this customer in the brewing process. This technology also includes the LW2720 radar sensor which is used for continuous level monitoring in a tank containing degassed water. The tank itself has a conical bottom that tapers downwards and is equipped with a spray ball, which has proved challenging in the past.

For the radar sensor, however, the geometry of the tank poses no problem, and the measurement is accurate at all times. The key is the 80 GHz frequency at which the sensor emits the signal in a very narrow beam angle. This means that the radar waves remain unaffected by the spray ball, both during and after cleaning.

“In the past, the conical bottom often led to problematic signal curves during the filling and emptying process. Today, the radar sensor monitors the fill level over the entire tank height and provides reliable measurement results,” says Meckatzer Brewery.